C010Rn1Ce8

1. Hp Color Laserjet Pro Mfp M477fnw User Manual
2. Hp Color Laserjet Pro Mfp M477fdw Manual
3. Manual Hp Color Laserjet Pro Mfp M477fdw
4. Hp Laserjet Pro Mfp M477fnw User Guide

Hp laserjet pro mfp m477fnw Wireless Printer Setup, Software & Driver

Hp laserjet pro mfp m477fnw

HP Color LaserJet Pro M452 and HP Color LaserJet Pro MFP M477 Troubleshooting Manual. Apr 15, 2016  Made in partnership with HP. Learn more about HP Color Laser Jet Pro Printers at All music provided with permission by audiom.

Wireless/Wifi/WPS Connection set-up Guide For Hp laserjet pro mfp m477fnw

Hp Color Laserjet Pro Mfp M477fnw User Manual

Before we start, there are however some conditions that must be met in order to use the WPS pushbutton method:

The access point must have a physical WPS push button available, please check with your device’s user guide for details.

Ur network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled access points will not connect using the WPS method if the WEP (Wired Equivalent Privacy) security method is used, or if no security is enabled. For details on which security method is being used on your wire-less network, please check the wireless connection settings on your computer.

Please follow the steps below to complete the set-up.

Make sure the wire-less router is in range of the printer & the WPS button is ready to be pressed.

-->-->-->Step to 2

Press & hold the (Wireless) button (A) on the printer until the wire-less lamp (B) flashes.

-->-->-->Step to 3

Press the (Wireless) button until the Direct lamp (D) lights up.

-->-->-->Step to 5

Press the (Colour) button, & make sure that the ON lamp (E) & the wire-less lamp flash, then press the (WPS) button on the wire-less router within 2 minutes. The blue WiFi lamp on the printer will continue to flash while searching, & the Power & WiFi lamps will flash when connecting to the access point.

-->-->-->Step to 6

When the printer has successfully made a connection to your wire-less network, the Power & WiFi lamps will stop flashing & remain lit. The network lamp will also light up.

For exact details regarding pressing the WPS button, please refer to the access point manual.

Network settings confirmation

To confirm that your printer is successfully connected to your wire-less network, u can print out the network settings of your printer if u wish:

• Make sure that your printer is turned on.
• Load a sheet of A4 or Letter-sized plain paper.
• Press & hold the (Wi-Fi) until the WiFi lamp flashes once, & then release it.
• Press the (Colour)
• Press the (Wi-Fi)
• Press the (Colour)

When referring to the printout, check that “Connection” indicates “Active” & that the SSID -Service Set Identifier (the name of your wire-less network) indicates the correct name of your wire-less network.

This concludes the WPS set-up procedure.

If u do not have the CD(’s) that came with your product, or u're a Mac user, please Download the software on Site.

--------------------------------------------------------------------------------------------------------------------------

Hp Color Laserjet Pro Mfp M477fdw Manual

Standard Connection Method (For Windows & Mac users only)

If your access point does not support the WPS feature, use the following instructions to set your printer up on your wire-less network:

For Windows users, insert the CD that came with your printer & runs the setup.

If u do not have a CD drive, or you're a Mac user, then please download the software.

Connection for Windows Users Only

-->-->-->Step to 1

Double-click on the downloaded .exe file to open the following screen & click (Start Setup).

-->-->-->Step to 2

The software will check to see if there are any updates to the driver & software. This may take a few minutes to complete.

-->-->-->Step to 3

If u accept the terms of the license agreement, click (Yes).

-->-->-->Step to 5

If u would like to take part in the extended survey program, click (Agree).

Ensure (Deactivate the block) is checked & click (Next) .

-->-->-->Step to 7

The following screen will be displayed for a few seconds.

-->-->-->Step to 8

Ensure that your printer is powered on & click (Next).

-->-->-->Step to 10

The software will search for any printers already set up on your network.

-->-->-->Step to 11

If u have already connected your printer to your network, select it from the list & click (Next) to start the software installation, then proceed to.

-->-->-->Step to 16 .

If u cannot see your printer listed, continue to -->-->-->Step to 12.

-->-->-->Step to 12

If this is the first time you're setting up your printer, it will not be displayed in the list.

Ensure (Set up the network connection according to the guide) is selected & click (Next).

-->-->-->Step to 13

The set-up guide will open & guide u through connecting your printer to your network using the easy wire-less connect process.

Please follow the on-screen instructions carefully to prepare your printer for connection.

Only click next, when your printer corresponds with the example shown in the diagrams below -

-->-->-->Step to 14

Once u have made the necessary settings on your printer, the software will now temporarily disconnect your computer from your wire-less network & connect directly to your printer to configure the network settings.

Ur computer will re-connect to your wire-less network automatically once this has completed.

-->-->-->Step to 15

When the connection is established, click (Next) to continue with the software installation.

-->-->-->Step to 16

The printer driver software will now install & register onto your computer. This will take a few minutes to complete.

-->-->-->Step to 17

If this is the first time u're setting up your printer, it's recommended to perform the print head alignment. Click (Execute) to start the process & follow the on-screen instructions.

If u have already aligned the print head, click (Next).

-->-->-->Step to 18

Once successfully printed, click (Next).

-->-->-->Step to 19

Click (Next) to see a list of optional software u can also install.

-->-->-->Step to 20

20 From the list select any additional software u wish to install & click (Next).

-->-->-->Step to 21

Once the additional software has installed, u will see a message informing u about setting up your smartphone or tablet. Click on (Instructions) to find out more information on setting up your device, or click (Next) to continue.

-->-->-->Step to 22

To register your printer, click (Next) (this will open in a web browser).

Click (Exit) to finish the installation.

Connection For Mac users only

-->-->-->Step to 1

Double-click on the downloaded .dmg file to open the following screen.

Double-click on the (Setup) icon to start the setup. If the following screen appears, click (Open).

-->-->-->Step to 2

When the following screen appears, type your Password to allow the Helper Tool to be installed, then click on (Install Helper).

-->-->-->Step to 3

The software will check to see if there are any updates to the driver & software & download them as necessary.

-->-->-->Step to 5

If u accept the terms of the license agreement, click (Yes).

-->-->-->Step to 7

If u would like to take part in the extended survey program, click (Agree), otherwise click (Do not agree).

-->-->-->Step to 8

If your printer has already been connected to your wire-less network, u will see the following screen. Click (Yes) to continue with the installation & jump to -->-->-->Step to 17 . If your printer has not yet been connected please continue to -->-->-->Step to 10.

-->-->-->Step to 10

If your printer has not yet been connected to your wire-less network, u will see the following screen. Select wire-less LAN Connection, then click (Next).

-->-->-->Step to 11

Ensure that your printer is powered on & click (Next).

-->-->-->Step to 12

The software will search for any printers already set up on your network.

-->-->-->Step to 13

If this is the first time u're setting up your printer, it will not be displayed on the list.

Ensure (Set up the network connection according to the guide) is selected & click (Next) .

-->-->-->Step to 14

The set-up guide will open & guide u through connecting your printer to your network using the easy wire-less connect process.

Please follow the on-screen instructions carefully to prepare your printer for connection.

Only click next, when the printer corresponds with the example shown in the diagrams below.

-->-->-->Step to 15

The software will now temporarily disconnect your computer from your wire-less network & directly connect to your printer to configure the network settings.

Ur computer will re-connect to your wire-less network automatically once this has completed.

When the following message is displayed, click (Allow).

-->-->-->Step to 16

When the connection has successfully completed, click (Next).

-->-->-->Step to 17

The printer driver software will now install on to your computer.

The software will now temporarily disconnect your computer from your wire-less network & directly connect to your printer to configure the network settings.

Ur computer will re-connect to your wire-less network automatically once this has completed.

If the following message is displayed, click (Allow).

-->-->-->Step to 19

Select Canon 'MG/MX/TS/MP series' 'Bonjour Multifunction' from the list & click (Add) .

-->-->-->Step to 21

After adding your printer, the set-up screen may be hidden by the web browser. If this happens, click on the set-up icon set-up located in the dock, to display the screen again.

Once the printer has been added, click (Next) to continue.

-->-->-->Step to 22

If this is the first time u're setting up your printer, it's recommended to perform print head alignment. Click (Execute) to start the process & follow the on-screen instructions.

If u have already aligned the print head, click (Next).

-->-->-->Step to 23

Click (Start) to perform a test print & click (Print) .

The set-up of your printer is now complete.

Click (Next), to see a list of optional software u can also install.

-->-->-->Step to 25

From the list select any additional software u wish to install & click (Next).

-->-->-->Step to 26

Once the additional software has installed, u will see a message informing u about setting up your smartphone or tablet. Click (Instructions) to find out more information on setting up your device, or click (Next) to continue.

-->-->-->Step to 27

To register your printer, click (Next) (this will open in a web browser). Alternatively, click (Skip).

-->-->-->Step to 28

Once the additional software has installed, click (Exit) to finish the installation.

--------------------------------------------------------------------------------------------------------------------------

Restoring your printer’s network settings back to factory default

Restoring your printer’s network settings back to factory default. If u need to reset your network settings back to factory default, for example, if u change your access point, u can do so by following these instructions:

Please note that initialization erases all network settings on the machine, so printing or scanning from a computer over the network will become impossible until the printer is re-configured with new network settings.

-->-->-->Step to 1

Press & hold the (RESUME/CANCEL) button until the ALARM lamp flashes 19 times.

-->-->-->Step to 2

The network settings have been reset back to factory default settings.

Please now refer to the WiFi set-up – (WPS or Standard Connection methods) for instructions on setting up your printer onto your WiFi network.

How to Scan Hp laserjet pro mfp m477fnw

The Windows Fax & Scan utility enables u to scan doc & pictures. Before u can scan doc & pictures u must have a scanner installed on your computer. Your scanner must be listed in the Devices section of the Devices & Printers Control Panel window.

To check to see if your scanner is properly installed open the Device Stage. Choose Start→Devices & Printers. If Windows doesn’t automatically find your scanner u can manually add it in the Devices & Printers window by clicking the Add a Device button in the toolbar & following the wizard’s commands.

Choose Start→All Programs→Windows Fax & Scan.

Click the Scan button in the Navigation pane then click the New Scan button on the toolbar.

Use the settings on the right to describe your scan.

By letting the computer know what you’re scanning its color profile & the type of file u plan to create u enable Windows Fax & Scan to create the highest quality scan.

-->-->-->Step to 4

Click the Preview button to see what your doc will look like.

If you’re happy with the preview click the Scan button.

Windows scans the document & presents u with an image of your document.

-->-->-->Step to

Click the Save As button & complete the necessary information.

Enter the filename the type of graphics file u want to be saved & then click the Save button.

To automatically forward the document u have just scanned as an attachment to a new fax message click the Forward as Fax button.

The scan feature in the Windows Fax & Scan utility is set primarily to scan text documents. If u want to scan a photograph or other graphic you’re better off doing that directly within the Windows Live Photo Gallery.

The scan feature in the Windows Fax & Scan utility is set primarily to scan text documents. If u want to scan a photograph or other graphic you’re better off doing that directly within the Windows Live Photo Gallery.

Hp laserjet pro mfp m477fnw Driver Download & Software Download

Hp laserjet pro mfp m477fnwseries Full Driver & Software Package

Hp laserjet pro mfp m477fnwseries MP Drivers (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)

Hp laserjet pro mfp m477fnw series Mini Master Setup (Windows 8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)

Hp laserjet pro mfp m477fnw series XPS Printer Driver (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)

Hp laserjet pro mfp m477fnwEasy-PhotoPrint EX (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)

Hp laserjet pro mfp m477fnw My Image Garden (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)

Hp laserjet pro mfp m477fnwQuick Menu (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)

Hp laserjet pro mfp m477fnw My Printer (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)x64/Vista/Vista64/XP)

Hp laserjet pro mfp m477fnwseries Full Driver & Software Package - (Mac Os )

Hp laserjet pro mfp m477fnw series CUPS Printer Driver - (Mac Os)

Hp laserjet pro mfp m477fnwICA Driver - (Mac Os)

Setup:

Click to 'DOWNLOAD'

Click Open File

Then Restart your Device

Open the control panel of your device

Double click on the driver file you want to uninstall

click Finish

HP Color LaserJet Pro MFP M477fnw Drivers, Software, Scanner Driver, Wireless Setup, Firmware Updates, Manual Setup for Windows and MacOS – Here we discuss a little about HP printer and also some important equipment for HP printer Officejet Pro 8600 you need so your device can function properly. Basically, we only help you to be able to maximize your device while operating on the printer to print, scan and install the drivers.

Recommended: HP Color LaserJet Pro M452dn Driver Download – Setup Install

Driver

“https://printersutility.com” provide some links of HP Color LaserJet Pro MFP M477fnw Drivers, Software, Wireless setup, driver scanner, Firmware Updates and manuals for Windows computer and Mac OS computers. We support the HP printer scanner printer device provider is best for users, all of the links we provide on this website is sourced directly from the HP printer. Choose some driver that corresponds to your PC.

• Compatibility – Windows 10 (32-bit)/10 (64-bit)/7 (32-bit)/7 (64-bit)/8 (32-bit)/8 (64-bit)/8.1 (32-bit)/8.1 (64-bit)/Vista (32-bit)/Vista (64-bit)/XP (32-bit) – Mac OS X 10.7

Software

Complete solution software for the HP Color LaserJet Pro MFP M477fnw can include everything you need to install and use Your HP printer. This software collection includes a complete set of drivers, the installer and the optional software. Here we provide an HP Color LaserJet Pro MFP M477fnw software download link below:

HP ePrint Software

HP ePrint software makes it easy to print from your desktop PC/laptop to HP ePrinter. You can easily print your digital scroll wirelessly with HP printers that are supported on a local wireless network Wi-Fi, a wireless-capable HP printer or via a LAN cable. In addition, you can also print to a printer that supports HP ePrint you when you are at home, the Office, even when traveling, every time the printer is connected to the internet. Then you can also print to thousands of locations of public printing HP ePrint.

HP Print and Scan Doctor

HP Print and Scan Doctor who deliberately designed by HP support printer to be able to send to the user features for troubleshooting, which is indispensable to resolve many common issues that are often experienced in the printing and scanning on a product that connects to a PC/computers based Windows. You can only run this tool and you follow the instructions on the screen to help.

Wireless troubleshooting

Troubleshoot wireless network – wireless function turn off first and immediately connect computer/PC to the router with the cable’s “Ethernet“. Next, restart your computer and check your internet connection. If still no internet connection then you reboot the router and modem is anything that is used.

Firmware Updates

This firmware update addresses security very repentant. The files that we attach below can only be used with the HP web site. us expect never use the Firmware Update him through other means. You can download the latest version of the firmware update here or directly from the Official HP. Inc. To download You can click the link below.

Manual

Manuals if you want to access the user guide (PDF) then you should first there’s application”Adobe Acrobat Reader” to get to access, view, and print. better to use the latest version of the reader for the easy and smooth user. To view the user guide in PDF you live click the link “Adobe’s” below.

Reference

You want access to the link from the article’s discussion of this printer please visits the official website of HP. Inc. by way of a link click here: HP Color LaserJet Pro MFP M477fnw Printer Support & Download

Manual Hp Color Laserjet Pro Mfp M477fdw

Read More: HP LaserJet 600 M601 Driver Download – Setup Install

Hp Laserjet Pro Mfp M477fnw User Guide